MeasuringRangeinSteel0

產品型號：

更新時間：2024-06-26

廠商性質：代理商

訪問量：289

產品咨詢 13352927502

詳細介紹在線留言

Measuring Range in Steel

0.040 - 8.00 inches

1.00 - 200.0 mm

The new CHECK-LINE TI-44N Ultrasonic Wall Thickness Gauge accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side!

The attractive, ergonomic housing design is extremely compact, lightweight and rugged. It fits comfortably in the palm of your hａnd and incorporates a back light that illuminates the LCD in poorly lit areas. This product is similar to our Check-Line Checkline TI-45N, however the probe is hard-wired to the gauge and is NOT removable as in the Check-Line TI-45N.

Resolution of 0.001" (0.01mm) with Switch-selectable units of inches or mm
Extremely small & lightweight operating from a single AA battery.
Fixed-mounted probe is connected to gauge with one meter flexible cable (39")
Built-in calibration test plate on front of gauge housing
Quick display update with last reading retained on the display
Display symbols alert user to poor coupling and low battery conditions
NIST-Traceable Calibration Certificate & Test Report is optionally available

Range in Steel	0.040 - 8.000" (1.0 - 200.0 mm)
Resolution	.001" (0.01 mm)
Display	4? - digit LCD display, 0.39" (10mm) high with push button illumination
Velocity Range	3,250 - 39,000 ft/sec (1,000 - 12,000 m/sec) continuously adjustable
Probe	5 MHz, .39" (10 mm) diameter
Cable	39" (1m) 2-wire, long cable with fixed-mounted to gauge body
Minimum Pipe Size	1" nominal (30mm) steel pipe
Temp. Limits	Ambient: 25 to 125° F (-5 to 50° C) Material: -15 to 140° F (-10 to 60° C)
Calibration Plate	0.250" (6.35mm) steel plate, built into the front of the housing
Battery Type	1x AA battery
Battery Life	200 hours
Weight	Gauge: 7 ounces (200 g)
Size	5.2" x 2.7" x 1.1" (131 x 68 x 29 mm)
Warranty	Gauge: 1 years Probe: 90 days

訂貨清單

The Checkline TI-44N is supplied as a complete kit with the gauge and wrist strap, probe and cable assembly, 2 oz. bottle of coupling fluid, battery and instruction manual -- all supplied in a cardboard pack as shown.

配件

TICC-M Protective Holder for Most TI Series Gauges

CF12 Coupling Fluid - 12oz

V-Block V-Block Transducer Holder (For 3/16" & 1/4" Transducers only)

T-102-2000 1/4" diameter, 5.00 MHz, dual element transducer

BATT-RC4AA-WC 4-pack 2300mAh AA Ni-MH Rechargeable Batteries & Charger Kit

訂貨型號

TI-44N Ultrasonic Wall Thickness Gauge kit with integrated 5mhz, 10mm probe

相關型號

TI-45N

TI-25M-UWM

TI-25-UM-50