扭力螺絲刀緊固件的聯結質量直接影響到各種儀器儀表、機電設備、家用電器等產品的使用質量至這些產品的可靠程度

產品型號：

更新時間：2024-06-26

廠商性質：代理商

訪問量：302

產品咨詢 13352927502

詳細介紹在線留言

扭力螺絲刀緊固件的聯結質量直接影響到各種儀器儀表、機電設備、家用電器等產品的使用質量至這些產品的可靠程度。所以扭力螺絲刀等扭力工具在工業生產中也逐漸被使用的越來越多了。

扭力螺絲刀用于檢測已固定在物體上的螺絲或螺帽的松緊程度，測量螺絲或螺帽旋入或旋出時的扭力。有跟隨模式，實時模式和峰值保持模式，測量正反方向扭力。

2 Models
DID-05: Capacity: 4.500 lb-in / 50.00 N-cm
DID-4A:Capacity: 35.00 lb-in / 400.0 N-cm

The DID is a torque measuring manual screwdriver designed for lab and production use. The large LCD display measures bi-directional torque in real-time or peak modes. USB data output allows the user to graph torque vs time with optional SW-1SD software.

The DID has an accuracy of ± 0.5% F.S., ±1 LSD and has programmable setpoints that provide both an audible beep and green/red LED indicator for uniform tightening or GO/NO GO testing. In addition, it features a programmable counter that minimizes assembly errors by identifying mis-tightening and/or defective screws. Optional ratcheting clutch allows for convenient tightening or loosening. Use the 800 internal memory for data recall or USB download for SPC.

The DID substantially reduces scrap and rework costs by eliminating over and under-tightening and is ideal for use in a wide variety of applications including the manufacture of electronic, appliance and aerospace assemblies.

Includes NIST Traceable Calibration Certificate, ISO-17025 Cert Optional
Peak, Real Time and Peak Down measuring mode (selectable)
Statistics: number of data, Max, Min, Avg
Programmable screw tightening counter
DID-4 uses standard 1/4" bits, DID-05 uses 4mm hex bits.
Selectable units ozf-in, lbf-in, kgf-cm, N-cm and N-m
Runs on internal NiCad batteries (8 hour use) Auto shut-off after 10 min. of non-use
Programmable High and Low set points with both audible beep and Green/Red LED indicator for uniform torque tightening or GO/NO GO testing
USB?virtual COM?port sends peak (1 data) or continuous data (12 or 180 data/second)
800 data memory for recall or for SPC download
Programmable Auto Zero function resets unit to zero for easy operation
2 Phillips tips, AC charger and carrying case included
2-Year Warranty

Accuracy	+/- 0.5% F.S., +/- 1 LSD
Display	4 digit LCD
Operation	CW, CCW and fixed position (DID-4 Only)
Measuring Modes
PP	Peak Mode displays PEAK torque value that will not change until a higher value is measured
PD	Peak Down Mode Captures first peak down value above the PDLO
Real Time	Displays transient torque values
C	Real-time Output 180 data per second
GO/NO GO testing	Programmable High and Low setpoints with both audible beep and Green/Red LED indicator
Statistics	Number of data, maximum, minimum and average
Data Transfer	ASCII, 19200 bps, USB miniB cable
Data Memory	800 data
Batch Counter	1-99 (CW only)
Power Supply	Ni-Cad rechargeable batteries 1.2V×4cells 600mAh
Auto Power Save	Automatic switch off after 10 minutes of non-use
Charging Time	From empty - less than 5hours
Working Time	12 hours continuous use
Accessories	AC/DC Adapter/Charger, 100~230VAC, 2 Phillips bits, NIST certificate
Warranty	2-Years

訂貨型號

DID-4A	Digital Torque Screwdriver, 35 lb-in / 4Nm Capacity
DID-4A-ISO	Digital Torque Screwdriver, 35 lb-in / 4Nm Capacity with ISO-17025 Calibration Cert
DID-05	Digital Torque Screwdriver, 4.5 lb-in / 50 N-cm Capacity
DID-05-ISO	Digital Torque Screwdriver, 4.5 lb-in / 50 N-cm Capacity with ISO-17025 Calibration Cert

配件

SW-1SV-USB	Data Acquisition Software for DID-4 Torque Screwdriver
SS-209	USB Output Cable for DID Torque Screwdriver
3A-066WP12-120	Spare / Replacement Power Adapter from DID-4
RA2	Ratchet Clutch for use with DID-4A Torque Screwdriver